Fault Tolerance

Fault Tolerance

The ADN provides fault tolerance at the server level, within pools or farms. This is accomplished by designating specific servers as a 'backup' that is activated automatically by the ADN in the event that the primary server(s) in the pool fail.[13]

The ADN also ensures application availability and reliability through its ability to seamlessly "failover" to a secondary device in the event of a hardware or software failure. This ensures that traffic continues to flow in the event of a failure in one device, thereby providing fault tolerance for the applications. Fault tolerance is implemented in ADNs through either a network or serial based connection.

Network Based Failover

The Virtual IP Address (VIP) is shared between two devices. A heartbeat daemon on the secondary device verifies that the primary device is active. In the event that the heartbeat is lost, the secondary device assumes the shared VIP and begins servicing requests. This process is not immediate, and though most ADN replicate sessions from the primary to the secondary, there is no way to guarantee that sessions initiated during the time it takes for the secondary to assume the VIP and begin managing traffic will be maintained.

Serial Based Failover

In a serial connection based failover configuration two ADN devices communicate via a standard RS232 connection instead of the network, and all sharing of session information and status is exchanged over this connection. Failover is nearly instantaneous, though it suffers from the same constraints regarding sessions initiated while the primary device is failing as network based failover.